khemsynth 3 Posted October 30 Share Posted October 30 Compare with Legacy2 my system can run 58-60fps steady with 1080p max setting AAx16. But 1.6.2 or back to 1.6.0 I can't run over 30fps with same setting. I must turn off all effect and everything set to low to increase fps. My graphic driver is up to date. AMD A10 5800K 8Gb of RAM AMD RX470 WIN10 Quote Link to post Share on other sites
oldman777 120 Posted October 30 Share Posted October 30 (edited) For me performance is excellent. Almost like Legacy. Edited October 31 by oldman777 Quote Link to post Share on other sites
khemsynth 3 Posted October 31 Author Share Posted October 31 20 hours ago, oldman777 said: For me performance is excellent. Almost like Legacy. You're lucky. Some people in steam have concern about fps drop after update. Especially deep mud area I can feel laggy frame on my screen. But on hard dirt fps is fine. (if not move camera around) Quote Link to post Share on other sites
oldman777 120 Posted October 31 Share Posted October 31 23 minutes ago, khemsynth said: You're lucky. Some people in steam have concern about fps drop after update. Especially deep mud area I can feel laggy frame on my screen. But on hard dirt fps is fine. (if not move camera around) I tried in the mud. FPS is slightly higher, but also normal. Maybe it depends on the video card manufacturer, AMD or GeForce. Quote Link to post Share on other sites
khemsynth 3 Posted October 31 Author Share Posted October 31 (edited) After I replying. I decided to re-install windows 10. And this video is the game with clean and fresh. As you see, At first part fps stand with 60 and drop a bit when moving camera. But after that, It's drop by half in mud area. Now let see at the end. Fps back to 60 again when leave that area. So weird. Maybe it's from graphic card manufacturer like you said. - -' (run on SSD) Edited October 31 by khemsynth Quote Link to post Share on other sites
Maxtron220 1 Posted October 31 Share Posted October 31 There is a serious optimization problem, With those specifications, You are more than enough, And you are going very bad friend, And it is as you say, If you enter the irregular terrain, The Fps are lowered, Or they remain intermittent, And if on firm ground, As long as you do not move the camera, or it depends on the area, the Fps goes up, or at least it stabilizes, I noticed if on Steam there are several complaints with similar problems, Some with crazy hardware, and even so the game goes bad!, I I tried everything and nothing, I just have to wait to see if they echo this problem, And a solution! Some had no dramas, but many others did! Quote Link to post Share on other sites
khemsynth 3 Posted October 31 Author Share Posted October 31 (edited) 3 hours ago, Maxtron220 said: There is a serious optimization problem, With those specifications, You are more than enough, And you are going very bad friend, And it is as you say, If you enter the irregular terrain, The Fps are lowered, Or they remain intermittent, And if on firm ground, As long as you do not move the camera, or it depends on the area, the Fps goes up, or at least it stabilizes, I noticed if on Steam there are several complaints with similar problems, Some with crazy hardware, and even so the game goes bad!, I I tried everything and nothing, I just have to wait to see if they echo this problem, And a solution! Some had no dramas, but many others did! Yes, Now I'm enjoy converting 1.6.2. and all trucks from dlcs (except the Chernobyl that I didn't buy) to old Legacy build. LOL Edited October 31 by khemsynth Quote Link to post Share on other sites
ridrigs 0 Posted November 1 Share Posted November 1 yes for min on legacy2 it ran at 60fps and 1.6.1 also so on friday when it updated it was 30 fps and when selecting large trucks it was even worse Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.